RUBBER CONVEYOR BELTS
We offer nylon fabricated conveyor belting system, designed to provide high speed, long life and better performance in terms of cost per tonnage of material it convey. Our Constructional Features
HIGHER TENSILE STRENGTH:
We offer an advanced strength, nylon fabricated belts that has rationalize the traditional cotton belts. Our two piles of nylon fabric are equal to the strength of five piles of cotton fabric.
Due to the chemical bonding between cover to ply and ply to ply, our adhesion to nylon conveyor belting system, is double to that of conventional cotton belts
COMPLETE ROT RESISTANCE:
Our conveyor belt has eradicated the problem fabric deterioration, where we use wet material.
REDUCED BELT WEIGHT:
Our nylon conveyor belts are is to handle as they are lighter than the equivalent all-cotton belts due to reduced piles and lower weight.
STRAIGHT PLY CONSTRUCTION:
Our nylon fabricated belts are laid straight extending across the width of the belt.
STEPPED PLY CONSTRUCTION:
Our conveyor belts are cushioned with extra rubber cover to fill the missing gaps in first and second plies to improve transverse flexibility.
REVERSE STEPPED PLY CONSTRUCTION:
It is the reverse of one stepped ply construction, where missing gaps in first and second plies are filled with rubber to improve the flexibility. These belts are designed with waterlogged ash handling installation in boiler plants that operate under water. The specifications of rubber cover used in belt are:
- Thickness at the bottom 3.05/ 5.0 mm
- Thickness at the top at 1.5/ 2.0 mm
- Heat resistant cover grade used is 4/2
- H-Tex cover grades used is 5/3
- Reversed stepped plies equal to 6/4
BREAKER PLY CONSTRUCTION:
To protect against the longitudinal impact of breaks, we have laid "leno weave" breaker cords diagonally across the belt. The breaker fabrics are also used in pairs where they are laid on opposing 450 angles for extra severe impact protection. Further we also offer proceed breaker, which are used for adding 1mm thickness to the belt.
For improving additional interaction between the piles, we provide extra thickness to our rubber coating by inserting heat impact cushion. In case of cut in our rubber we provide scan quote service to our clients
We offer nylon fabricated conveyor belting system in cut and molded edge, as they are rot resistance to guard against edge wearing. Our belts are sharply molded to avoid the entrance of moisture in the corner of the belt, to protect against it we are adding to it 1200 mm rubber cover. We manufacture our wide range of rubber cover using finest quality input carcass or Nylon / Nylon (NN) Carcass. The salient features of carcass include:
- Lower longitudinal elongation
- Higher tensile strength
- Good Flexibility and trough ability
- Good resistance to edge wears
- Good resistance to milde.